A.3 configuration commands/responses – Comtech EF Data KST-12000 User Manual
Page 112
KST-12000 Ku-Band Satellite Terminal
Revision 4
Remote Control Operation
MN/KST12000.IOM
A.3 Configuration Commands/Responses
Up
Converter
Freq Select
Command:
Response:
Status:
Response:
RF_OFF'cr''lf']
Where:
In version -1, nnnnn.n = 14000.0 to 14500.0 MHz, in 2.5
MHz steps.
In version -2, nnnnn.n = 14000.0 to 14500.0 MHz, in 1.0
MHz steps.
Down
Converter
Freq Select
Command:
Response:
Status:
Response:
Where:.
In version -1, nnnnn.n = 10950.0 to 12750.0 MHz, in
2.5 MHz steps.
In version -2, nnnnn.n = 10950.0 to 12750.0 MHz, in
1.0 MHz steps.
RF Output
Command:
Response:
Status:
Response:
Where: xxx = ON, WRM, or OFF.
The OFF command will keep the RF output turned OFF under
all conditions.
The WRM command is a conditional ON command, instructing
the RF output to come ON after the unit is warmed up and
meets stability requirements.
The ON command is an override, instructing the output to be
ON and to ignore the warm start.
Up
Converter
Attenuator
Command:
Response:
Status:
Response:
Where: nn.n = 0.0 to 25.0 dB, in 0.5 dB steps.
Down
Converter
Attenuator
Command:
Response:
Status:
Response:
Where: nn.n = 0.0 to 31.0 dB, in 0.5 dB steps.
A–4