Comtech EF Data KST-12000 - Manual (Page 24)

KST-12000 Ku-Band Satellite Terminal Revision 4
Introduction MN/KST12000.IOM
Table 1-2. RFT-1200 Specifications (Continued)
Transmit
Frequency Range 14.0 to 14.5 GHz, in 2.5 MHz steps
Frequency Range (Optional) 14.0 to 14.5 GHz, in 1.0 MHz steps
Transmitter Power Options at 1 dB Compression
Point:
+8 dBm
2W
5W
8W
16W
Transmitter Power Option:
+8 dBm
2W
5W
8W
16W
Gain at 1 dB compression point with customer
attenuator at 10 dB:
26 dB gain
63 dB gain
67 dB gain
69 dB gain
72 dB gain
Linear Gain with customer attenuator at 10 dB:
27 dB
64 dB
68 dB
70 dB
73 dB
Transmitter Linear Gain vs. Customer Controlled
Attenuator Setting 0 to 25 dB, factory setting = 10 dB
TX Bandwidth 70 MHz with 1 dB BW of ± 18 MHz
Gain Flatness ± 1 dB/36 MHz
Gain Variation ± 2 dB max for flatness, temp, aging
TX Freq Stability ± 1 x 10 -8 at 23°C (73 °F)
Daily TX Freq Stability ± 1 x 10 -8 at 23°C (73 °F)
Annual TX Freq Stability ± 1 x 10 -7 at 23°C (73 °F)
TX Freq Drift/Temp ± 1 x 10 -8 from -40 to +55°C (-40 to 131 °F)
TX Synthesizer Lock-Up time < 1 second
TX Phase Noise (2.5 MHz steps) -60 dBc/Hz at 100 Hz
-70 dBc/Hz at 1 kHz
-75 dBc/Hz at 10 kHz
-80 dBc/Hz at 100 kHz
Optional TX (1.0 MHz steps)
Phase Noise -60 dBc/Hz at 100 Hz
-66 dBc/Hz at 1 kHz
-75 dBc/Hz at 10 kHz
-80 dBc/Hz at 100 kHz
M&C (optional):
Signals Monitored/Controlled
RS-232/RS-485
Transmit Frequency
Receive Frequency
Transmit Gain
Receive Gain
RF On/Off
LNA Fault
SSPA Fault
Up Converter Fault
Down Converter Fault
TX Synthesizer Fault
RX Synthesizer Fault
1–10