Comtech EF Data KST-12000 User Manual

Page 67

KST-12000 Ku-Band Satellite Terminal

Revision 4

Redundant System Installation

MN/KST12000.IOM

6. Mount the RFTs as follows:

a. Lift the RFT into position on

the vertical pole.

b. Slip a 14” unistrut over each

of pair of threaded rods
(upper and lower).

Note: Install the 14” unistruts
with the open face toward the
pole, as illustrated.

c. Install a 5/16” flat washer,

5/16” split lockwasher, and
5/16-18 nut on each threaded
rod.

d. Position the RFT, as desired,

and tighten the 5/16-18 nuts
installed in Step 6.c.

e. Slide the pipe blocks in until

they contact the vertical pole.

Then, firmly tighten the
5/16-18 bolts.

3–15