Comtech EF Data FX Series Administrator Guide - Manual (Page 91)

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.1.1 91
Chapter: FX Series ADC Specific Settings
Section: Overview
MN-FXSERIESADM6 Rev 5
5 FX Series ADC Specific Settings
Figure 5-1 FX Series ADC Configuration Menu
5.1 Overview
This chapter discusses in much greater detail, General Settings and Port Definitions of the FX Series ADC
appliances. The key elements are listed below.
The following items are listed in Section 4 FX Series Basic Network Settings.
Basic Network Interfaces
Redundancy
Host Settings
LAN Interfaces
Multicator
In-Path Interfaces
Quality of Service
WCCP
FX Series ADC General
Control enablement of DDS, and the traffic interception method. Configure basic HTTP settings and
system time.
FX Series ADC Port Definitions
Define the IP addresses and ports that the FX will listen on for the purpose of optimizing data flow to a
web or application server. FX Series ADC General Configuration Settings
These settings allow you to configure advanced parameters that apply to many aspects of the FX Series
application delivery controller (FX Series ADC).