Comtech EF Data FX Series Administrator Guide - Manual (Page 76)

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.1.1 76
Chapter: FX Series Network Settings
Section: FX Series Multicator Overview
MN-FXSERIESADM6 Rev 5
Transaction Rate:
This is the max speed that a multicast transmitter will transmit a file. The default value is
based off the license.
Figure 4-15 FX Series Multicator Transmitter/Receiver Configuration Settings
Multicator Transmitter Settings
Enable Multicast Transmitter:
This setting enables the multicast transmitter on this appliance.
Incoming FTP User:
This is the user name that must be used when content is uploaded to the FX appliance.
The default is "mc".
Incoming FTP Password:
This is the password that must be used when content is uploaded to the FX appliance.
The default password is “comtech”.
Multicator Receiver Settings
Enable Multicast Receiver:
This setting enables the multicast receiver on this appliance.
FTP Server:
This is the IP address of the FTP server into which newly received content will be
fanned-out.