Fx series hardware specification, Figure 1-6 fx series hardware specifications, 3 fx series hardware specification – Comtech EF Data FX Series Administrator Guide User Manual
Page 39

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.1.1
39
Chapter: Overview - FX Series
Section: FX Series Appliances Data Sheet
MN-FXSERIESADM6 Rev 5
Data Sheet Notes:
(a) When used as an ADC, the FX-1005 will handle 3000 concurrent sessions.
(b) Maximum accelerated WAN rates are a function of compressibility. If all content is being GZIP compressed
with a ratio of greater than 4:1, the maximum WAN rate may not be accelerated.
(c) The number of images handled per second is a function of image size.
FX-4010-ADC
FX-1005-ADC
I
MAGE
S
IZE
I
MAGES PER
S
ECOND
I
MAGES PER
S
ECOND
10
KB
1800
80
50KB
1000
35
500KB
100
35
(d) Available as either a stand-alone feature or part of the WAN optimization product. As a stand-alone feature,
the maximum data rate is 700 Mbps, when purchased with the WAN optimization; the data rate is limited to
the WAN optimization rate.
(e) Packets per second (PPS) is 50% outbound and 50% inbound. Header compression is currently only available
in point-to-point configurations and is not currently supported in the FX-1010. Header Compression is
currently available as either a standalone feature added to the base configuration or part of the WAN
Optimization product. When purchased without the WAN Optimization feature the maximum rate is 700KBps.
When included with WAN Optimization, the data rate is limited to the WAN Optimization rate.
(f) Header Compression only.
Configuration Models
Base Configuration with QOS only as an option with no WAN Optimization.
Option 1 Add Header Compression (rates up to700KBps) with no WAN Optimization.
Option 2 Wan Optimization including Header Compression with rates as shown in the tables.
1.8.3 FX Series Hardware Specification
FX Series 1005 FX Series 1010 FX Series 4010
Model
FX-1005
FX-1010
FX-4010
Form Factor
1RU
1RU
1RU
Weight
2.6 lbs (1.2kg)
13.3 lbs (6.0 kg)
15 lbs (6.8 kg)
Dimensions
(h x w x d)
1.7” x 8.5” x 7.4”
(43 x 215 x 188 mm)
1.7” x 17.0” x 15.6”
(44 x 431 x 395 mm)
1.7” x 16.8” x 14.0”
(43 x 427 x 356 mm)
Memory
4 GB
4 GB
16 GB
Storage
(1) 160 GB SATA
(1) 160 GB SATA
(1) 1 TB SATA III
Network Interface (GE)
Ports/Fail-to-Wire Pairs
4/1
11/0
4/1
Serial Ports
1
1
1
USB Interface Ports
2
2
2
Rack Mount Kits
1 or 2 units in 1RU
Power Supply – UL Approved,
FCC Compliant
Requires a 60 W/12V power
adapter with lock
200 W ATX power supply
unit with input range of
90~264V@ 47-63 Hz
Single Power
(200 W)
Auto (100V-240V)
Environment
Operating temp
0 - 40°C,
Storage temp
-20 - 60°C,
Humidity 5 - 90%
Operating temp
0 - 40°C,
Storage temp
-20 - 60°C,
Humidity 5 - 90%
Operating temp
10 - 35°C,
Storage temp
-40 - 70°C,
Humidity 8 - 90%
Figure 1-6 FX Series Hardware Specifications