Comtech EF Data FX Series Administrator Guide - Manual (Page 68)

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.1.1 68
Chapter: FX Series Network Settings
Section: Configuring Quality of Service with ACM
MN-FXSERIESADM6 Rev 5
4.6.3 QoS Filter Definitions
If the user checks a box and clicks “Add” the rank will be set based upon the rank of the selected item.
Each of those actions lead to a Filter Definition screen. The rules in the pick-list will be sorted based upon
Rank. “Up" and "Down" buttons will appear at the bottom of the pick list to move rules up or down in
priority. An existing entry may be chosen by clicking on the queue name.
The Default filter is a wild card filter that will always be the last filter evaluated. The Default filter maps
data to the Default Queue. This can be reconfigured in the Filter Edit screen.
NOTE: If the FX appliance is positioned between clients and a network device requiring ARP
resolution, such as a router or default gateway, a high priority QoS filter for ARPs should be
defined.
Add QoS Filters
The fields on this screen dictate how traffic will be directed to a queue
Figure 4-10 FX Series QoS Filters Configuration Screen
QoS Filter Definitions
Name:
This summarizes the customer/function of the filter. This field must be entered and must be
unique.