Comtech EF Data FX Series Administrator Guide - Manual (Page 107)

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.1.1 107
Chapter: FX Series Status
Section: FX Series ADC Status
MN-FXSERIESADM6 Rev 5
Users:
This is the total number of unique IP addresses that currently have one or more TCP connections from the
remote users to the FX Series ADC.
LAN Connections
This is the number of TCP connections from the FX Series ADC to backend content servers such as web
servers or file servers.
WAN Connections
This is the number of TCP connections between the remote users (including FX Series Remotes) and the
FX Series ADC.
Status
This shows the current state of the acceleration service. Possible values are “Active”, or “Stopped”.
Server running since
This is the date and time that the FX Series ADC was last started.
Refresh interval (sec)
This is how often real-time monitor will refresh the statistics. Changes take effect immediately and are
stored as a browser cookie and remembered in subsequent accesses to the real-time monitor.
Action Buttons
Restart Service:
This button provides a means to restart the acceleration service.
Detailed stats:
This displays all aggregate tallies accumulated since the ADC service was last started or since they were
last reset.
Connections:
This displays a list of each connection-group. If the ADC is accelerating traffic for FX-Remotes then a
connection group may be comprised of multiple TCP connections that form a TurboStream. If the ADC is
servicing HTTP clients in a one-sided mode then each connection group will be comprised of a single TCP
connection. When the list is displayed you can drill down on an individual connection-group to examine
detailed tallies.
Reset Stats:
This button clears the acceleration server tallies and other stats including the stats displayed in the status
monitor.
Clear cache:
This clears all objects out of all caches and then restarts the acceleration service.