Comtech EF Data FX Series Administrator Guide - Manual (Page 10)

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.1.1 x
Chapter: Using This Document
Section: Document Organization
MN-FXSERIESADM6 Rev 5
Using This Document
This guide was prepared to assist you in the installation, configuration and management of the FX Series Appliances.
This document contains the same information that is available thru the on-line help contained with the FX Series web
based administrative screens. This document supports Release 6.1 of FX Series Appliances.
Document Organization
Release Notes
This section delineates the major changes from the prior release.
Theory of Optimization
This section discusses the characteristic of data transmission that will cause slow response and higher
bandwidth requirements. It also delineates techniques that can reduce the slowness and help reduce
bandwidth requirements.
FX Series Technology
This section provides a brief description of the hardware and optimization techniques available through the
FX Series of appliances.
FX Series Installation Patterns
This section provides instruction on how to install the available configurations for all FX Series appliances.
FX Series Basic Network Settings
This section discusses how to set the basic networking parameters, such as Management Interface, Host
Settings, SNMP Settings, Multication, Quality of Service and High Availability.
FX Series ADC Specific Network Settings and Performance
This section discusses ADC specific network settings and current performance status, including General
Settings, In-Path Settings and WCCP.
FX Series Optimization
This section discusses optimization issues and definitions of optimization techniques available on the FX
Series appliances for web based or enterprise applications.
FX Series Remote Specific Network Settings and Performance
This section discusses Remote specific network settings and current performance status, including General
Settings and In-Path Settings.
FX Series Operations
This section discusses tools to perform operational tasks, including Backups, License Management,
Shutdown/Restart, and Updating Software for all FX Series Appliances. This section also describes how to
obtain FX Series documentation downloads for the FX Series Appliances.
Symbols used in this manual: Important Note Informational Note