Comtech EF Data FX Series Administrator Guide - Manual (Page 117)

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.1.1 117
Chapter: FX Series Status
Section: FX Series Remote Status
MN-FXSERIESADM6 Rev 5
Throughput:
This is the throughput, in bits per second, since the last refresh interval.
Pass through bytes processed:
This is the total quantity of bytes that have flowed through the acceleration server but no
optimization operations were attempted.
Users:
This is the total quantity of unique IP addresses that have TCP connections flowing through the
FX Remote.
LAN Connections:
This shows the quantity of TCP connections between clients and the FX Remote.
WAN Connections:
This shows the quantity of TCP connections between the FX Remote and FX SERIES ADCs.
Status:
This shows the current state of the acceleration service. Values are “Active”, or “Stopped”.
Server running since:
This is the date and time when the acceleration server was last started.
Refresh interval (sec):
This is how often real-time monitor will refresh the statistics. Changes take effect immediately
and are remembered in subsequent accesses to the real-time monitor.
Action Buttons
Restart Service:
This provides a means to restart the acceleration service.
Detailed stats:
This displays tallies and other stats.
Connections:
This displays the active user connections to the acceleration server.
Reset Stats:
This clears the acceleration server tallies and other stats including the stats displayed in the
status monitor.
Clear cache:
This clears all objects out of all caches, and then restarts the acceleration service.