Comtech EF Data CRS-170A - Manual (Page 67)

CRS-170A L-Band 1:1 Redundancy Switch MN/CRS170A.IOM
Modem and Switch Configuration Revision 13
4–19
4.7 CDM-600L (CLM-9600L) Operation in 1:1 Redundancy
• CLM-9600L Open Network Satellite Modem Installation and Operation Manual
(CEFD P/N MN/CLM9600L.IOM)
• CRS-150 1:1 Redundancy Switch Installation and Operation Manual
(CEFD P/N MN/CRS150.IOM)
1) Correct operation of the CRS-170A requires use of the CRS-150 1:1
Redundancy Switch.
2) While the CDM-600L (CLM-9600L) Open Network Satellite Modems require
no unique 1:1 configuration settings, they must have the following installed:
• Firmware Version 1.1.4 (or higher)
• Hardware Revision 3
If the modems do not meet this requirement, contact Comtech EF Data
Product Support. Firmware updates are free and may be downloaded from
the Comtech EF Data web site. (www.comtechefdata.com). Hardware
revision upgrades must be performed at CEFD.
4.8 SDM-300L3 Operation in 1:1 Redundancy
• SDM-300L3 Satellite Modem Installation and Operation Manual
(CEFD P/N MN/SDM300L3.IOM)
• SMS-301 Redundancy Switch Installation and Operation Manual
(CEFD P/N MN/SMS301.IOM)
1) Correct operation of the CRS-170A requires use of the SMS-301 Redundancy
Switch.
2) While the SDM-300L3 Satellite Modems need no unique 1:1 configuration
settings, they must have the following installed:
• Firmware Version 1.1.4 (or higher)
• Hardware Revision 3
If the modems do not meet this requirement, contact Comtech EF Data Product
Support. Firmware updates are free and may be downloaded from the Comtech
EF Data web site. (www.comtechefdata.com). Hardware revision upgrades must
be performed at CEFD.