Comtech EF Data CRS-170A - Manual (Page 59)

CRS-170A L-Band 1:1 Redundancy Switch MN/CRS170A.IOM
Modem and Switch Configuration Revision 13
4–11
4.5 Configure the CDM-570L/ALs for 1:1 Redundancy
• CDM-570/CDM-570L/CDMR-570L Satellite Modem Installation and Operation
Manual (CEFD P/N MN/CDM570L.IOM)
• CDM-570A/CDM-570AL/CDMR-570AL Satellite Modem Installation and
Operation Manual (CEFD P/N MN-CDM570A)
For correct operation of the CRS-170A, the CDM-570/A Satellite Modems must have
the following installed:
• CDM-570AL Base Modem Firmware Version 1.1.1 (or higher)
• CDM-570AL with Optional IP Packet Processor Firmware Version 1.2.1 (or
higher)
• CDM-570L Base Modem Firmware Version 1.6.7 (or higher)
• CDM-570L with Optional IP Module Firmware Version 1.5.4.2 (or higher)
• CDM-570L Hardware Revision 3
If your modems do not meet this requirement, contact Comtech EF Data Product
Support. You may download free Firmware updates from the Comtech EF Data web
site. Hardware revision upgrades must be performed at Comtech EF Data.
Front Panel
Telnet Command Line Interface (CLI)
Ethernet HTTP (Web Server) Interface
Figure 4-2. CDM-570L/AL Configuration Interface Examples