Comtech EF Data CRS-170A - Manual (Page 133)

CRS-170A L-Band 1:1 Redundancy Switch MN/CRS170A.IOM
Cables and Connections Revision 13
5–63
5.9.2.2 Gigabit Ethernet Data Interface (CDI-70) Example
See CEFD White Paper “Bridged Ethernet Interface Redundancy” available for
download from Comtech EF Data’s Web site (www.comtechefdata.com).
Figure 5-45 shows the block diagram and cabling example for a CDM-710 1:1 modem
configuration with the CDI-70 Gigabit Ethernet data interface installed in Slot 2, with Slot 1
empty. This setup requires no cabling and component kit – you must use user-provided Ethernet
cables and Layer 2 Switch for direct connection to the CDI-70.
CDM-710 Block Diagram – CDI-70 Gigabit Ethernet Interface
Figure 5-51. CDM-710 CDI-70 Gigabit Ethernet 1:1 Example