Comtech EF Data MCED-100 - Manual (Page 82)

MCED-100 MetaCarrier Embedding Device Revision 1
Ethernet-based Remote Product Management MN-MCED100
6–16
• GPS Latitude – This is the latitude that is being transmitted on the MetaCarrier; the source
of the latitude is the active GPS source: internal, external, or none (user).
• GPS Longitude – This is the longitude that is being transmitted on the MetaCarrier; the
source of the longitude is the active GPS source: internal, external, or none (user).
6.4.4.4.2 Status | Alarms
Use this page to view cumulative alarms and stored events information.
Figure 6-9. Status | Alarms page
Alarms
Use the associated drop‐down menu to define a designated alarm as Alarm, Fault or Masked,
and then click [Change] to initiate.
Note the following:
• If Alarm is selected, then the condition will cause a ‘yellow’ alarm.
• If Fault is selected, then the condition will cause a unit fault indication.
• If Masked is selected, then no alarm will be generated.