Comtech EF Data MCED-100 - Manual (Page 70)

MCED-100 MetaCarrier Embedding Device Revision 1
Ethernet-based Remote Product Management MN-MCED100
6–4
The user defines two Community Strings for SNMP access:
• Read Community
default = public
• Write Community
default = private
For proper SNMP operation, the MCED‐100 MIB files must be used with the
associated version of the MCED‐100 M&C. Please refer to the MCED‐100 FW Release
Notes for information on the required FW/SW compatibility.
6.4 Web Server (HTTP) Interface
A user‐supplied Web browser allows the full monitoring and control (M&C) of the MCED‐100
from its Web Server Interface. The MCED‐100’s embedded Web application is designed for, and
works best with, Microsoft’s Internet Explorer Version 7.0 or higher.
6.4.1 User Login
Type the MCED‐100’s Management IP Address (shown here as http://xxx.xxx.xxx.xxx) into the
Address area of the user PC’s Web browser:
The login page opens.
Enter the assigned User Name and
Password – the default for both is
comtech. Click [Log On].
If the User Name and Password
are accepted: The MCED‐100’s
Web Server Interface Home (Info)
page, similar to the example shown
here, appears: