beautypg.com

Chapter 5. serial-based remote product management, 1 introduction – Comtech EF Data MCED-100 User Manual

Page 57

background image

5–1

Chapter 5. SERIAL-BASED REMOTE PRODUCT

MANAGEMENT

5.1

Introduction

1. To  proceed  with  the  MCED‐100  MetaCarrier®  Embedding  Device’s  Serial‐based  Remote  Product  Management, 

assumptions are made that: 

The MCED‐100 is operating with the latest version firmware files. 

 

The MCED‐100 is connected to a user‐supplied,  Windows‐based PC, and: 

o

The PC’s serial port is connected to the MCED‐100’s serial ‘CONSOLE’ port with a user‐supplied serial cable. 
 

o

The  PC’s  Ethernet  port  is  connected  to  the  MCED‐100’s  ‘ETHERNET  MANAGEMENT’  RJ‐45  10/100  BaseT  Fast 
Ethernet port with a user‐supplied hub, switch, or direct Ethernet cable connection. 
 

o

The  PC  is  running  a  terminal  emulation  program  (for  operation  of  the  MCED‐100  Serial  Interface)  and  a 
compatible Web browser (for operation of the MCED‐100 Web Server Interface). 

The MCED‐100’s Management IP Address has been noted using the MCED‐100 Serial Interface .  

 

Note  that,  while  use  of  the  serial  port  connection/Serial  Interface  is  required  only  for  initial  configuration  of  the 
‘ETHERNET MANAGEMENT’ port, it is also useful for firmware updating operations. 

This manual is related to the following products: