1 configuration | config – Comtech EF Data MCED-100 User Manual
Page 78

MCED-100 MetaCarrier Embedding Device
Revision 1
Ethernet-based Remote Product Management
MN-MCED100
6–12
Once the unit reboots, the user must log in once again to resume use of the Web Server
Interface. See the Utility | Reboot page (Sect.6.4.4.5.2) for complete details about the reboot
process.
6.4.4.3 Configuration Pages
Use the nested ‘Configuration’ pages to configure all unit parameters. Click the Config or
Interface tab to continue.
6.4.4.3.1
Configuration | Config
Figure 6-6. Configuration | Config Page
MetaCarrier Info
• MAC Address – The MAC Address is read‐only and cannot be changed.
• User Defined Latitude – Use this box to enter the desired latitude, up to a maximum of
eight alphanumeric characters. This value is transmitted in the MetaCarrier when the
internal and/or external GPS’ are not connected.
• User Defined Longitude – Use this box to enter the desired longitude, up to a maximum of
nine alphanumeric characters. This value is transmitted in the MetaCarrier when the
internal and/or external GPS’ are not connected.
• MetaCarrier Manufacturer – Comtech EF Data is identified here as CEFD.