2 configuration | interface – Comtech EF Data MCED-100 User Manual
Page 80

MCED-100 MetaCarrier Embedding Device
Revision 1
Ethernet-based Remote Product Management
MN-MCED100
6–14
6.4.4.3.2
Configuration | Interface
Use this page to configure the RJ‐45 10/100 BaseT Fast Ethernet ETHERNET MANAGEMENT
port.
Figure 6-7. Configuration | Interface page
Management Interface
• MAC Address – The MAC Address is read‐only and cannot be changed.
• IP Address / Subnet – Use this box to enter the IP Address and Subnet Mask in CIDR format.
The valid range for the Subnet Mask is from 8 to 30.
• Gateway – Use this box to enter the IP Gateway Address.
Click [Submit] to save these settings.
This manual is related to the following products: