Avery Dennison Pathfinder 6057 System Administrator Guide - Manual (Page 51)

Configuring D 2of5 Bar Codes
1. To configure D 2of5 settings, select D 2of5 from the Scanner
Configuration window.
2. Enable each bar code you need to scan.
D 2of5 Allows the scanner to scan D 2of5 bar codes.
Lengths
Sets the
length(s)
for D
2of5 bar
codes.
Variable, specifies that D 2of5 bar codes can be any
length.
Note:
Specifying a range of lengths increases the
likelihood of unsuccessful scans.
1 Fixed, Specifies a single length for valid D 2of5
bar codes. The range for Length 1 is 2 – 99.
The default is 12.
2 Fixed,
Specifies two lengths for valid D 2of5 bar
codes. The range for Length 2 is 2 – 99.
The default is 0.
3. Touch OK to save all the settings and return to the Scanner
Configuration window.
Configuring RSS Bar Codes
1. To configure RSS settings, select RSS from the Scanner
Configuration window.
2. Enable each bar code you need to scan.
RSS 14 Allows the scanner to scan RSS 14 bar codes.
RSS
Limited Allows the scanner to scan RSS Limited bar codes.
RSS
Expanded Allows the scanner to scan RSS Expanded bar
codes.
RSS to
UPC/EAN Tells the scanner to convert RSS bar codes into an
UPC/EAN bar code.
3. Touch OK to save all the settings and return to the Scanner
Configuration window.
Configuring the Scanner 7-9