Avery Dennison Pathfinder 6057 System Administrator Guide - Manual (Page 38)

L a b e l w it h vo i d s
Select: The following label prints:
Gray Scale Label The gray scale test checks the uniformity
of the printing. The printed sample
should be uniformly gray across the
supply. If you see voids, especially on
the edges, keep the sample and call
Service.
Serial Quality Label A label prints bar codes for you to scan
to check the quality of serial bar codes.
Parallel Quality Label A label prints bar codes for you to scan
to check the quality of parallel bar codes.
Contrast Use the arrow keys to change the print contrast. The higher the
number, the darker the print; the lower the number, the lighter the
print.
The print contrast controls the darkness of the printing on your
supply. The range is –100 to +100 and the default is 0. You may
need to increase or decrease the print contrast depending on your
supply type.
The correct print contrast setting affects how well your bar codes
scan and how long your printhead lasts.
3. Touch OK to return to the Printer Diagnostics window.
OR
Touch X to return to the desktop.
6-4 System Administrator’s Guide