Locking the usb ports, Changing the pc connection, Locking the usb ports -9 – Avery Dennison Pathfinder 6057 System Administrator Guide User Manual
Page 17: Changing the pc connection -9
Locking the USB Ports
The printer contains two USB ports. The smaller USB port is the Device Port, which is used to
connect the printer to a PC. The larger port is the Host Port, which is used to transfer data with
a flash drive.
1.
Touch the Emerald key to access the Start Menu, select
Settings
, Control Panel, and System Lockdown.
2.
Touch the USB tab.
3.
You can lockdown the USB Host Port and the USB Device Port
by checking the boxes.
Note:
If Lockdown USB Device Port is already selected, you may
have disabled “Enable direct connections to the desktop
computer” from the PC Connection Properties window.
See “
” for more information.
4.
When you are finished, touch OK.
5.
A small padlock icon shows in the task bar. When you touch
the Emerald key, the printer prompts you to enter the
administrator password.
C h a n g i n g t h e P C C o n n e c t i o n
To enable or disable direct connections to the desktop computer (printer), follow these steps:
1.
Touch the Emerald key to access the Start Menu, select Settings, Control Panel, and PC
Connection
.
2.
Check the box to enable direct connections to the desktop computer (printer).
If you disable this option, it enables “Lockdown USB Device Port” on the System Lockdown
USB tab. See “
” for more information.
3.
Touch Change Connection to change the USB connection.
Administrative Tools 2-9