Avery Dennison Pathfinder 6057 System Administrator Guide - Manual (Page 13)

There are several ways to “wake up” the printer:
 touch the display (first touch “wakes up” the printer; touch the display again to perform the
action shown on the display, for example, OK.) This is recommended for User or System
Idle mode.
 touch a key (first touch “wakes up” the printer; touch the key again to perform the key’s
action – for example, touching the Home key.) This is recommended for User or System Idle
mode.
 press the trigger (also activates the scanner).
 press the power button. This is the only way to “wake up” the printer when the printer is in
Suspend mode.
1. Touch the Emerald key to access the Start Menu, select Settings, Control Panel, and Power.
Three tabs appear: Battery, Schemes, and Device Status. The Battery tab displays the current
power levels for the main battery and backup battery. The Device Status tab displays the
current power levels of various devices.
2. Touch the Schemes tab to change the User and System Idle settings.
Administrative Tools 2-5