Artesyn RTM-ATCA-7360 Installation and Use (June 2014) - Manual (Page 35)

Hardware Preparation and Installation
RTM-ATCA-7360 Installation and Use (6806800J08M) 35
If you integrate the blade in your own system please contact your local sales representative for
further safety information.
2.2.2 Power Requirements
The RTM gets safety-extra-low-voltage (SELV) power from the front blade.
2.3 Installing the Hard Disk Module
The RTM provides a hot swappable SAS hard disk module. In this section you can find
information on how to install the hard disk module.
Table 2-3 Power Dissipation
Characteristic Value
Measured Power dissipation of ATCA-
7360/7365 with RTM 260 W
Measured Max Power dissipation of
RTM-ATCA-7360 22 W
Damage of Circuits
Electrostatic discharge and incorrect RTM installation and removal can damage circuits or
shorten their life.
Before touching the RTM or electronic components, make sure that you are working in an
ESD-safe environment.
The RTM is shipped with an HDD slot cover.