Artesyn RTM-ATCA-7360 Installation and Use (June 2014) - Manual (Page 33)

Hardware Preparation and Installation
RTM-ATCA-7360 Installation and Use (6806800J08M) 33
Table 2-1 Environmental Requirements
Requirement Operating Non-Operating
Temperature +5 °C (41 °F) to +40 °C (104 °F) (normal
operation) according to NEBS Standard
GR-63-CORE
-5 °C (23 °F) to +55 °C (131 °F)
(exceptional operation) according to
NEBS Standard GR-63-CORE -40 ºC (-40 °F) to +70 °C (158 °F) (may be
further limited by installed accessories)
Temp. Change +/- 0.25 °C/min according to NEBS
Standard GR-63-CORE +/- 0.25 °C/min
Rel. Humidity 5% to 90% non-condensing according
to Artesyn-internal environmental
requirements 5% to 95% non-condensing according to
Artesyn-internal environmental
requirements
Vibration 0.1 g from 5 to 100 Hz and back to 5 Hz
at a rate of 0.1 octave/minute 5-20 Hz at 0.01 g
2
/Hz
20-200 Hz at -3.0 dB/octave
Random 5-20 Hz at 1 m
2 /Sec 3
Random 20-200 Hz at -3 m/Sec 2
Shock Half-sine, 11 m/Sec, 30mSec/Sec 2 Blade level packaging
Half-sine, 6 mSec at 180 m/Sec
2
Free Fall - 1,200 mm/all edges and corners
1.0 m (packaged) per ETSI 300 019-2-2
(blade level packaging)
100 mm (unpacked) per GR-63-CORE