Artesyn RTM-ATCA-7360 Installation and Use (June 2014) - Manual (Page 25)

Chapter 1
RTM-ATCA-7360 Installation and Use (6806800J08M) 25
Introduction
1.1 Features
The following rear transition modules (RTMs) are available: RTM-ATCA-7360, RTM-ATCA-
7360-L.
The RTM-ATCA-7360 and RTM-ATCA-7360-L offer the following features:
 One USB 2.0 interface
 6x (RTM-ATCA-7360) or 2x (RTM-ATCA-7360-L) 10/100/1000Base-T Ethernet ports
 RAID 0 & 1, and 3 Gbps capable SAS controller connected to PCI-E on ATCA Zone 3
 Two SAS ports to support external SAS JBOD and storage clustering
 Two SAS ports to access local disk drive and redundant disk in a logically paired ATCA slot
 Local hot swappable SAS HDD, up to 600 GB (The HDD is ordered separately.)
1.2 Standard Compliances
The product is designed to met the following standards.
Table 1-1 Standard Compliances
Standard Description
UL 60950-1
EN 60950-1
IEC 60950-1
CAN/CSA C22.2 No 60950-1 Legal safety requirements
CISPR 22
CISPR 24
EN 55022
EN 55024
FCC Part 15
EN 300386
NEBS Standard GR-1089 CORE EMC requirements on system level (predefined Artesyn
Embedded Technologies system)
ISO 8601 Y2K compliance