Artesyn NITX-315/NITX-315-ET Installation and Use (August 2014) - Manual (Page 77)

BIOS
NITX-315/NITX-315-ET Installation and Use (6806800L71D) 77
USB Configuration USB Configuration Parameters, see Table 5-11 on page 79
LM80 H/W Monitor Monitor hardware status, see Table 5-12 on page 80
EMC2103 H/W Monitor Monitor hardware status, see Table 5-13 on page 80
Serial Port Console Redirection Serial Port Console Redirection, see Table 5-14 on page 80
Table 5-6 ACPI Settings
Field Description
ACPI Sleep State Select the highest ACPI sleep state the system will enter, when the
SUSPEND button is pressed. States: Suspend Disabled and S3
(Suspend to RAM). Default is "S3(Suspend to RAM)".
Table 5-7 Trusted Computing
Field Description
TPM Configuration
TPM SUPPORT Enables or Disables TPM support. O.S. will not show TPM. Reset of
platform is required. Items: Disable or Enable. The default value is
"Disable".
TPM State Turn TPM Enable/Disable. NOTE: Your Computer will reboot during
restart in order to change State of TPM. Items: Disabled, Enabled.
Default is "Disabled".
Pending TPM Operation Schedule TPM operation. NOTE: Your Computer will reboot during
restart in order to change the State of TPM.
Items: None, Enable Take Ownership, Disable Take Ownership, TPM
Clear. Default is "None".
Current TPM Status Information If TPM SUPPORT is Disable, the TPM Status information will show as
"TPM Support OFF" or "NO TPM Hardware" based on the TPM
hardware connection status. If TPM SUPPORT is set to "Enable", it will
show the following information
TPM Enable Status: Provides the current TPM Enable/Disable status information. Items:
Disabled, Enabled.
Table 5-5 Advanced Menu Field Description (continued)
Field Description