Artesyn NITX-315/NITX-315-ET Installation and Use (August 2014) - Manual (Page 32)

Hardware Preparation and Installation
NITX-315/NITX-315-ET Installation and Use (6806800L71D) 32
2.2 Unpacking and Inspecting the Board
Read all notices and cautions prior to unpacking the product.
Shipment Inspection
1. Verify that you have received all items of your shipment.
2. Check for damage and report any damage or differences to customer service.
3. Remove the desiccant bag shipped together with the board and dispose of it
according to your country’s legislation.
s5 0.038A (unplug ethernet)
0.155 A (plug ethernet) 0 0.456w (unplug
ethernet) 1.86w (plug
ethernet)
Table 2-4 NITX-315 Power Dissipation (continued)
State +12 V VCC_RTC Power consumption (w)
Damage of Circuits
Electrostatic discharge and incorrect installation and removal can damage circuits or
shorten their life.
Before touching the board or electronic components, make sure that you are working in an
ESD-safe environment.
Environmental Damage
Improperly disposing of used products may harm the environment.
Always dispose of used products according to your country’s legislation and manufacturer’s
instructions.