Artesyn MITX-430/MITX-440-DVI-2E Installation and Use (August 2014) - Manual (Page 91)

Operation
MITX-430/MITX-440-DVI-2E Installation and Use (6806800K37D) 91
5.4.5 Security Menu
5.4.6 Save & Exit Menu
Option ROM Messages Set display mode for Option ROM. The options are Force BIOS and Keep
Current.
Default value is Force BIOS.
Boot Option Priorities Sets the system boot order.
Hard Drive Boot Order Set the order of the legacy devices in this group.
Table 5-28 Boot Menu (continued)
Field Description
Table 5-29 Security Menu
Field Description
Administrator Password Set Setup Administrator Password.
User Password Set Setup User Password.
Table 5-30 Save & Exit Menu
Field Description
Save Changes and Exit Exit system setup after saving the changes.
Discard Changes and Exit Exit system setup without saving any changes.
Save Changes and Reset Reset the system after saving the changes.
Discard Changes and
Reset Reset system setup without saving any changes.
Save Changes Save changes done so far to any of the setup options.
Discard Changes Discard changes done so far to any of the setup options.
Restore Defaults Restore or load default values for all the setup options.