Introduction – Artesyn MITX-430/MITX-440-DVI-2E Installation and Use (August 2014) User Manual
Page 20

Introduction
MITX-430/MITX-440-DVI-2E Installation and Use (6806800K37D)
20
System BIOS feature
One piece 4MB SPI boot device
Super I/O
W83627UHG-LF
RTC
Integrated in ICH8-M
Audio
Audio on board (ALC888-GR-LF)
Rear: Line-in, Line out, MIC-in
LAN
10/100/1000M Ethernet PHY, Intel WG82567V
USB
Supports 10 USB2.0 high speed ports (four rear, five on header, and one mini
PCI-Express)
Expansion slots
One PCI-E x1 slot
One Mini-PCIE card slot
One standard USB flash disk (2x5Pin, 2.54mmPitch)
Rear panel ports
One 2xUSB2.0 ports stack one LAN (RJ-45)
One 2xUSB2.0 stack connector
One vertical triple stack (MIC-in, Line-in, Line-out)
One stack PS/2 port
One e-SATA port
One VGA DSUB-15
One stacked dual DSUB-9 serial port
Power connectors
24-pin ATX power connector
Fan
Supports two smart fans (4 Pin), one for CPU and one for System
Serial ATA
supports one e-SATA and two SATA ports
PATA
Supports one Mini-IDE (44Pin)
Hardware monitor
Voltage, temperature, and fan speed control
Watchdog
Supports 1-255s or 1-255m watchdog
Trusted Platform
Module
Supports one TPM connector (2x10, 2.54mm Pin header)
Power management
ACPI1.0b compatible
Supports ATX power supply
COM Port
Supports 6 COM ports (two to DSUB-9 in rear I/O region, one
RS-232/422/485 port, two Power COM, and one to 2x5Pin header)
Table 1-1 Single Core Processor Board Features (continued)
Function
Features