13 chipset, Functional description – Artesyn MITX-430/MITX-440-DVI-2E Installation and Use (August 2014) User Manual
Page 68

Functional Description
MITX-430/MITX-440-DVI-2E Installation and Use (6806800K37D)
68
4.13 Chipset
The MITX-430/MITX-440-DVI-2E is designed to use the Intel ICH8M I/O Hub. The ICH8 provides
extensive I/O support. Functions and capabilities are as follows:
PCI Express Base Specification, supports Revision 1.1.
PCI Local Bus Specification, supports Revision 2.3 for 33 MHz PCI operations.
Supports ACPI Power Management Logic.
Enhanced DMA controller, interrupt controller, and timer functions.
Integrated serial ATA host controllers with independent DMA operation on up to three
ports.
Integrated IDE controller supports Ultra ATA100/66/33.
USB host interface with support for up to ten USB ports, five UHCI host controllers, two
EHCI high-speed USB 2.0 host controllers.
Integrated 10/100/1000 GbE MAC.
System Management Bus (SMBus) Specification, Version 2.0 with additional support for
most I2C devices.
Supports Intel high definition audio.
Low Pin Count (LPC) interface.
Supports Serial Peripheral Interface (SPI).
GPIO52
I/O
5.5V
Core
Native
Multiplexed with
REQ2#
Unused, PU VCC3V3
GPIO53
I/O
3.3V
Core
Native
Multiplexed with
GNT2#
Used as a strap pin
GPIO54
I/O
5.5V
Core
Native
Multiplexed with
REQ3#
Unused, PU VCC3V3
GPIO55
I/O
3.3V
Core
Native
Multiplexed with
GNT3#
Used as a strap pin
Table 4-3 ICH8-M GPIO Definition (continued)
Name
Type
Tolerance
Power
Well
Default
Signal Description
Implementation