Artesyn MITX-430/MITX-440-DVI-2E Installation and Use (August 2014) - Manual (Page 60)

Functional Description
MITX-430/MITX-440-DVI-2E Installation and Use (6806800K37D) 60
I2C device address is given in the table below:
4.4 System Memory
The Pineview-D integrates a single channel 64bit non ECC DDR2 controller.
There are two 200pin SO-DIMM slots on MITX-430/MITX-440-DVI-2E, and supports up to 4GB
(assuming 2Gb density device technology) DDR2 memory at data transfer rate of 667MT/s.
4.5 Ethernet Interfaces
The MITX-430/MITX-440-DVI-2E provides two 10/100/1000 Ethernet, WG82567V and
WG82574L.
The WG82567V MAC is integrated in ICH8-M and uses WG82567V as GBE PHY. The connection
interface is GLCI between ICH8-M and WG82567V, and it occupies the PCIE port 6.
The WG82574L is a MAC and PHY GBE solution. The connection interface for WG82574L is PCIE
port 3.
4.6 PCI-E Port
There are total six PCI-E ports in ICH8-M, and Table 4-2 shows the PCI-E ports configuration.
Table 4-1 I2C Device Address
Device CK505* SPD0 SPD1 EMC2103* PCA9557 82574L W83627UHG
Address D2 A0 A2 5C 30 C2 5A
Table 4-2 PCI-E Port
Port Configuration
1 Connects to PCIEx1 slot
2 Connects to Mini PCIE slot
3 Connects to WG82574L