Artesyn MITX-430/MITX-440-DVI-2E Installation and Use (August 2014) - Manual (Page 34)

Hardware Preparation and Installation
MITX-430/MITX-440-DVI-2E Installation and Use (6806800K37D) 34
2.1.4.1 Full Loading Running Burn-in Test
VGA and LVDS dual display, without DVI display.
2.1.4.2 Idle Mode Power Consumption
VGA and LVDS dual display, without DVI display, tested 1minute after logging in Windows XP.
12V 5V 3.3V Total (W)
Current (A) 1.18 2.25 1
Power (W) 14.16 11.25 3.3 28.71
Source ATX ATX ATX
 Tested with 12.1" LCD Panel (P/N: G121X1-L01). The LCD inverter uses 12V.
 The test devices do not include PCIE x1 add-in card and Mini-PCIE card. The two SATA
devices are powered externally. If you use all the devices and power internally, then you
must add all the power consumption.
 It is recommended to add more buffer while designing the ATX power supply.
12V 5V 3.3V Total (W)
Current (A) 0.96 2.03 1.1
Power (W) 11.52 10.15 3.63 25.3
Source ATX ATX ATX
 Tested with 12.1" LCD Panel (P/N: G121X1-L01). The LCD inverter uses 12V.
 The test devices do not include PCIE x1 add-in card and Mini-PCIE card. The two SATA
devices are powered externally. If you use all the devices and power internally, then you
must add all the power consumption.
 It is recommended to add more buffer while designing the ATX power supply.