Artesyn MITX-430/MITX-440-DVI-2E Installation and Use (August 2014) - Manual (Page 19)

Chapter 1
MITX-430/MITX-440-DVI-2E Installation and Use (6806800K37D) 19
Introduction
1.1 Features
The MITX-430 is a Mini-ITX motherboard based on the Intel® Atom™ D410 single-core or
D510 dual-core processor that offers improved processing and graphics performance over
existing Mini-ITX Intel Atom based products.
It is designed to allow easy, cost-effective replacement of the motherboard in a production
environment. There are two versions of MITX-430:
 MITX-430 - Single core processor for low power consumption.
 MITX-440-DVI-2E - Dual core processor with some additional features for higher
performance, which still retains the low power consumption.
MITX-430 uses the latest generation Unified Extensible Firmware Interface (UEFI) Basic Input
Output System (BIOS) from
American Megatrends Inc ( AMI). This manages the interaction
between the low-level hardware interfaces and the OS level in an efficient manner that
provides superior reliability.
The following sections describe some of the key features of MITX-430 single core and MITX-
440-DVI-2E dual core processors.
1.1.1 MITX-430
The following table lists the features of the single core processor board:
Table 1-1 Single Core Processor Board Features
Function Features
CPU (uFCBGA)  Intel Pineview-D SC Processor (D410)
 Frequency: Pineview-D SC 1.66GHz with TDP less than 10W
 Supports up to 4GB DDR2 SO-DIMM
 Supports 667MHz
 Integrated Graphic Process Unit
 3rd generation graphics core, 400MHz render clock frequency
 Supports one VGA
 Supports one LVDS
Chipset Intel ICH8-M