Artesyn MITX-430/MITX-440-DVI-2E Installation and Use (August 2014) - Manual (Page 77)

Operation
MITX-430/MITX-440-DVI-2E Installation and Use (6806800K37D) 77
TPM Active Status Show current state of the TPM, Activated or Deactivated.
TPM Owner Status Show current TPM Ownership state, Owned or UnOwned.
Table 5-7 S5 RTC Wake Setting
Field Description
Wake system with Fixed
time Enable or disable system wake on alarm event. When enabled, system
wakes on the specified hr::min::sec.
Default value is Disabled.
Wake up hour Select 0-23, for example, enter 3 for 3AM and 15 for 3PM.
Default value is 0.
Wake up minute 0-59. Default value is 0.
Wake up second 0-59. Default value is 0.
Wake system with
Dynamic time Enable or disable system wake on alarm event. When enabled, system
wakes on the current time + Increase minute(s). Default value is
Disabled
.
Wake up minute increase 1-5. Default value is 1.
Table 5-8 CPU Configuration
Field Description
Processor Type
EMT64 EMT64
Processor Speed Processor speed
System Bus Speed System bus speed
Ratio Status Ratio Status
Actual Ratio Actual ratio
Table 5-6 Trusted Computing (continued)
Field Description