Artesyn MITX-430/MITX-440-DVI-2E Installation and Use (August 2014) - Manual (Page 69)

Functional Description
MITX-430/MITX-440-DVI-2E Installation and Use (6806800K37D) 69
4.14 Clock Generator
The MITX-430/MITX-440-DVI-2E contains a CK505 clock generator (ICS9LPR501) to provide
the clocks for various components.
4.15 Video
The graphic core is integrated in Pineview-D processor.
The GPU contains a refresh of 3rd generation graphics core, and improved GFX engine. The
GPU is a unified graphics driver which does end to end decode.
 Supports Directx* 9 compliant Pixel Shader* 2.0.
 Two display ports: LVDS and RGB.
– Single LVDS channel supporting resolution up to 1366 * 768, 18bpp.
– Analog RGB display output resolution up to 2048 * 1536 at 60 Hz.
 Intel® Dynamic Video Memory Technology support 4.0.
 Intel® Clear Video Technology.
– MPEG2 Hardware Acceleration
– ProcAmp
The MITX-430/MITX-440-DVI-2E supports dual-independent displays using the Intel Pineview-
D processor's Integrated Graphics Controller. The display is LVDS or VGA. During boot, the BIOS
detects whether a VGA monitor is attached or not. If VGA is attached, then the primary display
is VGA. If VGA is not detected, then BIOS defaults to LVDS.
4.16 Storage
 SATA
MITX-430/MITX-440-DVI-2E supports two SATA ports and one E-SATA port integrated
onboard which supports SATA Gen 2(3.0Gb/s).
Two SATA ports are routed to internal connector and one is routed to the E-SATA port.
 USB Solid State Drive
MITX-430/MITX-440-DVI-2E supports one standard USB flash disk (2x5Pin, 2.54mmPitch).