Artesyn MITX-430/MITX-440-DVI-2E Installation and Use (August 2014) - Manual (Page 79)

Operation
MITX-430/MITX-440-DVI-2E Installation and Use (6806800K37D) 79
Configure SATA as Enhanced: you can select the IDE, AHCI mode.
Compatible: you can select the legacy IDE Channels as SATA Only, SATA
Pri, PATA Sec, PATA only.
Table 5-10 IGD-LCD Control
Field Description
DVMT Mode Select Select DVMT Mode or Fixed Mode.
Default value is DVMT Mode.
DVMT/FIXED Memory Select DVMT or FIXED mode memory size used by internal graphics
device: The memory sizes are:

128MB
 256MB
 Maximum
Default value is 256MB.
IGD-Boot Type Select the Video Device which is activated during POST. This has no effect
if external graphic is present. The options are:

VBIOS Default
 CRT
 LFP
 DVI
 CRT +LFP
 CRT +DVI
Default value is CRT +LFP.
Note that the optional value DVI and CRT+DVI are only for MITX-440-DVI-
2E.
LCD Panel Type Select LCD panel used by Internal Graphics Device by selecting the
appropriate setup item. The LCD panel types are:

800x600 LVDS
 1024x768 LVDS
Default value is 1024x768 LVDS.
Table 5-9 IDE Configuration (continued)
Field Description