Artesyn MITX-430/MITX-440-DVI-2E Installation and Use (August 2014) - Manual (Page 22)

Introduction
MITX-430/MITX-440-DVI-2E Installation and Use (6806800K37D) 22
LAN  10/100/1000M Ethernet PHY, Intel WG82567V
 10/100/1000M Ethernet Controller, Intel WG82574L
USB Supports 10 USB2.0 high speed ports (four rear, five on header, and one mini
PCI-Express)
Expansion slots  One PCI-E x1 slot
 One Mini-PCIE card slot
 One standard USB flash disk (2x5Pin, 2.54mmPitch)
Rear panel ports  Two 2xUSB2.0 ports stack one LAN (RJ-45)
 One vertical triple stack (MIC-in, Line-in, Line-out)
 One stack PS/2 port
 One e-SATA port
 One VGA DSUB-15 stack DVI port
 One stacked dual DSUB-9 serial port
Power connectors 24-pin ATX power connector
Fan Supports two smart fans (4 Pin), one for CPU and one for the system
Serial ATA supports one e-SATA and two SATA ports
PATA Support one Mini-IDE (44Pin)
Hardware monitor Voltage, temperature, and fan speed control
Watchdog Supports 1-255s or 1-255m watchdog
Trusted Platform
Module Supports one TPM connector (2x10, 2.54mm Pin header)
Power management  ACPI1.0b compatible
 Supports ATX power supply
COM Port Supports 6 COM ports (two to DSUB-9 in rear I/O region, one
RS-232/422/485 port, two power COM, and one to 2x5Pin header)
LPT Port Supports one parallel port (2x13Pin Header)
Front panel 2x5Pin Header, supports power button, reset button, power LED, HDD LED,
and standby LED
GPIO Supports 4 GPI and 4 GPO
Table 1-2 Dual Core Processor Board Features (continued)
Function Features