Artesyn MITX-430/MITX-440-DVI-2E Installation and Use (August 2014) - Manual (Page 32)

Hardware Preparation and Installation
MITX-430/MITX-440-DVI-2E Installation and Use (6806800K37D) 32
VGA + LVDS dual display
2.1.3.2 Idle Mode Power Consumption
VGA + LVDS dual display
12V 5V 3.3V Total
Current(A) 0.88 1.8 0.67
Power(W) 10.56 9 2.21 21.77
 Tested with 12.1" LCD Panel (P/N: G121X1-L01). The LCD inverter uses 12V.
 The test devices do not include PCIE x1 add-in card and Mini-PCIE card. The two SATA
devices are powered externally. If you use all the devices and power internally, then you
must add all the power consumption.
 It is recommended to add more buffer while designing the ATX power supply.
12V 5V 3.3V Total
Current(A) 0.78 1.7 0.73
Power(W) 9.76 8.5 2.4 20.66
 Tested with 12.1" LCD Panel (P/N: G121X1-L01). The LCD inverter uses 12V.
 The test devices do not include PCIE x1 add-in card and Mini-PCIE card. The two SATA
devices are powered externally. If you use all the devices and power internally, then you
must add all the power consumption.
 It is recommended to add more buffer while designing the ATX power supply.