Artesyn ATCA-F120 Installation and Use (August 2014) - Manual (Page 96)

U-Boot Firmware
ATCA-F120 Installation and Use (6806800D06J) 96
5.7 Linux Devices
The following table lists all predefined Linux character devices and the respective memory
blocks which they are assigned to.
Table 5-2 Linux Devices
Linux Device Name Content Memory Area Hardware Device
/dev/mtd0 U-Boot boot
parameters 0xFE000000 -
0xFE01FFFF Active boot flash
/dev/mtd1 Kernel image 0xFE020000 -
0xFE51FFFF Active boot flash
/dev/mtd2 Empty 0xFE052000 -
0xFFF7FFFF Active boot flash
/dev/mtd3 U-boot image 0xFFF80000 -
0xFFFFFFFF Active boot flash
/dev/mtd4 -combined- 0xFE000000 -
0xFFFFFFFF Active boot flash
/dev/mtd5 U-Boot boot
parameters 0xFC000000 -
0xFC01FFFF Stand-by boot flash
/dev/mtd6 Kernel image 0xFC020000 -
0xFC51FFFF Stand-by boot flash
/dev/mtd7 Empty 0xFC052000 -
0xFD7FFFFF Stand-by boot flash
/dev/mtd8 U-Boot image 0xFDF80000 -
0xFDFFFFFF Stand-by boot flash
/dev/mtd9 -combined- 0xFE000000 -
0xFFFFFFFF Stand-by boot flash
/dev/mtd10
/dev/mtdblock: (device
name used by Linux
kernel for booting) NAND flash # 1 n.a. NAND flash # 1
/dev/mtd11
/dev/mtdblock; (device
name used by Linux
kernel for booting) NAND flash # 2 n.a. NAND flash # 2