Artesyn ATCA-F120 Installation and Use (August 2014) - Manual (Page 17)

Chapter 1
ATCA-F120 Installation and Use (6806800D06J) 17
Introduction
1.1 Features
The ATCA-F120 is an AdvancedTCA ™ switch blade as defined in the PICMG 3.0 Revision 2
AdvancedTCA Base Specification and PICMG 3.1 Revision 1.0 Specification Ethernet/Fiber Channel
for AdvancedTCA Systems.
The blade provides the following Ethernet interfaces:
 15 1000BaseT base channel interfaces via backplane
 15 10G-BX4/1000BX fabric channel interfaces via backplane
 SERDES interface via update channel
 One 1000Base-T management interface via face plate
 One Base Channel extension interface via face plate
 One 1000BaseT face plate interface which connects to AMC bay B1
 Optional Rear Transition Module (RTM)
Further features of the ATCA-F120 are the following:
 Freescale MPC8548E PowerQUICC III CPU
 At least 512 MBytes DDR2 SDRAM main memory with ECC support
 Dual boot flashes of 32 MBytes each
 Two NAND flashes with a size of two GBytes each
 Real-time clock
 Serial interface via face plate
 Serial interface via Update Channel (connection to second ATCA-F120 in the system)
 Support for two AMC bays
 AMC and backplane support for Clock Generator Module
 On-board IPMC