Artesyn ATCA-F120 Installation and Use (August 2014) - Manual (Page 84)

Functional Description
ATCA-F120 Installation and Use (6806800D06J) 84
Other sensors available on-board include voltage sensors and sensors which provide particular
status information. A summary of all sensors is given in the following table. For detailed
descriptions refer to the ATCA-F120: Control via IPMI Programmer’s Reference.
Table 4-7 IPMI Sensors Overview
Sensor Name Sensor Type Availability
-48V FEED A Voltage Always
-48V FEED B Voltage Always
1.0V FIX1 Voltage While payload powered
1.1V CPU Voltage While payload powered
1.25V BIX Voltage While payload powered
1.25V FIX2 Voltage While payload powered
1.2V Base Voltage While payload powered
1.8V Base Voltage While payload powered
1.8V CPU Voltage While payload powered
12V Primary Voltage While payload powered
2.5V Voltage While payload powered
3.3V MAC Voltage Always
3.3V Mgmt AMC B1 Voltage Always
3.3V Mgmt AMC B4 Voltage Always
3.3V Mgmt RTM Voltage Always
3.3V Payload Voltage While payload powered
BIX Temp Temperature Always
Boot Error Boot Error Always
Bottom Edge Temp Temperature Always
CPU Temp Temperature Always
Comp Side2 Temp Temperature Always
Ejector State Button / Switch Always
F120 Active Boot Artesyn-specific Discrete
Digital Always