ARRIS WTM552 User Guide - Manual (Page 65)

Touchstone® WTM552 Telephony Modem User’s Guide 65
Getting Battery Wireless Ethernet
Safety Started Installation Installation Configuration Configuration Usage Troubleshooting Glossary
Using the Reset Buttons
Use the Router Reset button to reset the Ethernet and wireless connections with-
out affecting the cable or telephony connections. You may need to reset the router
if you are having problems connecting to the Internet, but the phones are working.
To reset the Telephony Modem to factory defaults, hold the Router Reset button
for about 8 seconds.
Use the TM Reset button, on the back of the Telephony Modem, to reset the mo-
dem as if you power cycled the entire unit. The phones will be out of service until
the Telephony Modem finishes reconnecting to the cable system. You may need to
reset the Telephony Modem if you are having problems connecting to the Internet
or with the phones. This button should be used rarely.
The TM Reset button is recessed to prevent accidental resets. Use a pointed non-
metallic object to press this button.
The diagram to the left shows the location of the Reset buttons.
4,3,2,1
WTM552A/B
TM Reset
WTM552G/H
Router Reset