ARRIS WTM552 User Guide - Manual (Page 38)

Touchstone® WTM552 Telephony Modem User’s Guide 38
Getting Battery Wireless Ethernet
Safety Started Installation Installation Configuration Configuration Usage Troubleshooting Glossary
Configuring Wireless Security
1 Click the Security link under the Wireless menu to open the Security screen:
2 In the Security Mode menu, choose WPA unless you have wireless equip-
ment that does not support WPA; in that case, choose 128-bit WEP (more
secure) or 64-bit WEP (more compatible with older wireless equipment).
Depending on the security mode chosen, the WTM552 displays one of the
following screens to allow you to configure a key.
Jump directly to one of the following topics:
• Configuration Basics
• Accessing the Configuration Interface
• Configuring System Settings
• Setting Up Your WAN Connection
• Setting the MAC Address
• Setting Up DNS
• Configuring the LAN Channel and Name
• Configuring Wireless Security
• Configuring the Firewall
— Configuring Virtual Servers
— Configuring Client IP Filters
— Configuring MAC Address Filtering
— Configuring the DMZ
• Configuring DDNS
• Configuring Wireless Bridging