ARRIS WTM552 User Guide - Manual (Page 41)

Touchstone® WTM552 Telephony Modem User’s Guide 41
Getting Battery Wireless Ethernet
Safety Started Installation Installation Configuration Configuration Usage Troubleshooting Glossary
Configuring Virtual Servers
Follow these steps to allow outside access to servers on your internal network.
1 Click the Firewall link in the navigation menu, then click Virtual Servers.
The Virtual Servers window appears.
2 Proceed as follows:
3 Click the Save button at the bottom of the page (you may need to scroll
down) to save your changes.
4 Proceed to Configuring Client IP Filters .
If you want to… Then …
Add a well-known service Choose the desired service from the Add
drop-down menu and then click the Add
button.
Add a custom service Fill in a row as follows:
• Description: the service name.
• Inbound port: the beginning and ending
ports of the range required to support
this service. These are the ports that
outside clients use to access your server.
• Type: Choose TCP or UDP. If the service
requires passing both TCP and UDP
packets, you must create a second row.
• Private IP address: the IP address of the
server on your internal network.
• Private port: the beginning and ending
ports of the range required by this ser-
vice. The private ports may be different
from the Inbound ports.
Enable or disable a
service
Check (or clear) the box in the Enable column
next to the service.
Remove a service Choose the row to remove in the Clear Entry
drop-down menu and click the Clear button.