Argox PA-20 Basic Programming Manual - Manual (Page 88)

PT-Basic Programming Manual Ver. 1.00 87/143
3.16 Vibrator commands
VIBRATOR_TIMER
Purpose： To set or get the vibrator timer.
Syntax： A% = VIBRATOR_TIMER
VIBRATOR_TIMER = X%
Example： VIBRATOR_TIMER=5
…
PRINT “Vibrator timer:”,VIBRATOR_TIMER
Description： A% is an integer variable to be assigned as the vibrator timer.
X% is an integer variable indicating a period of time in units
of 100ms.
VIBRATOR
Purpose： To set the vibrator on/off.
Syntax： VIBRATOR(N%)
Example：
VIBRATOR(1) „Vibrator on
'Wait 0.5 sec
WAIT(100)
VIBRATOR(0) „Vibrator off
Description： N% is an integer variable indicating vibrator on or off.
N% Meaning
0 Vibrator off
1 Vibrator on