Argox PA-20 Basic Programming Manual - Manual (Page 103)

PT-Basic Programming Manual Ver. 1.00 102/143
If N1% is 1, the buzzer will sound for disconnect after connect,
else, the buzzer will do nothing for disconnect after connect.
And, if N1% is 1, the N2% will be set for buzzer sound time gap.
For example, if N2% is 2, the buzzer will sound for each 2 seconds.
GET_BT_ERROR
Purpose： To get the bluetooth error code.
Syntax： N%=GET_BT_ERROR
Example： N%=GET_BT_ERROR
Description： N% is an integer to be assigned to the result.