Argox PA-20 Basic Programming Manual - Manual (Page 109)

PT-Basic Programming Manual Ver. 1.00 108/143
A5. Commands for event trapping
Command description
OFF ALL To terminate all the event triggers.
OFF ESC To terminate ESC event trigger.
OFF COM To terminate COM event trigger.
OFF HOUR To terminate HOUR event trigger.
OFF KEY To terminate KEY event trigger.
OFF MINUTE To terminate MINUTE event trigger.
OFF READER To terminate READER event trigger.
OFF TIMER To terminate TIMER event trigger.
ON COM GOSUB To activate COM event trigger.
ON ESC GOSUB To activate ESC event trigger.
ON HOUR GOSUB To activate HOUR event trigger.
ON KEY GOSUB To activate KEY event trigger.
ON MINUTE GOSUB To activate MINUTE event trigger.
ON READER GOSUB To activate READER event trigger.
ON TIMER GOSUB To activate TIMER event trigger.
LOCK To hold all the activated event triggers until they
are released by UNLOCK.
UNLOCK To release all the activated event triggers held by
LOCK.
A6. System commands
Command description
AUTO_OFF To set auto power off timer.
DEVICE_ID$ To get the serial number of the terminal.
GET_TARGET_MACHINE$ To get the model name of the target terminal.
MENU To create a menu.
POWER_ON To determine whether to restart or resume the
program upon powering on.
RESTART To restart the system.
SYSTEM_INFORMATION$ To get information on components.
SYS_SUSPEND To shut down the system.
CHECK_AID To verify if the agency ID is correct or not.