Argox PA-60 Quick Start - Manual

49-PA601-001 Rev. A – Feb.2013
Depending on the configuration ordered, the PA-60 shipping container
may include:
To attach the hand strap
1. Fix the small cord of the strap around the pillar of the terminal.
(Figure 1)
Insert the handle of the strap in the thin loop. (Figure 2)
3.
2.
The strap is fixed to the terminal.
Hold the hand strap around the wrist when carrying the terminal
http;//www.argox.com See User Manual for more information
Figure1
Figure2
PA-60 Mobile Computer
Quick Start Guide
First time initiation of the product , please:
1. Fully charge the main battery for at least 16 hours;
2. Before inserting the main battery ,please verify the insertion
direction and battery contact are properly aligned;
3. For hand-grip model, ensure battery compartment lock is in
“ LOCK ” postion;
4. For pistol-grip model , ensure battery compartment lock is in
“ Free ” position before assembling; locking screw is fully engaged;
5. Press the [ ] reset and [ ] power button simultaneously to
clean up the system. (If Application has been preloaded, please
press the [
] power button only.
To avoide data loss, Please DO NOT remove the main battery
from the product for over 15 minutes.
Single slot Serial / USB Cradle
Charge LED Charging the Battery
Download ActiveSync ® 4.5 or higher from
http://www.microsoft.com
and follow
the instructions to install ActiveSync onto the host computer.
Follow the on screen ActiveSync instructions to establish a connection between the PA-60
and the host computer.
Install ActiveSync
Spare Battery
Charge LED
Red = Normal charge / Green = Full Charge
Press mobile computer
firmly into cradle