Argox PA-20 Basic Programming Manual - Manual (Page 115)

PT-Basic Programming Manual Ver. 1.00 114/143
A16. Vibrator commands
Command description
VIBRATOR_TIMER To set or get the vibrator timer.
VIBRATOR To set the vibrator on/off.
A17. Communication port commands
Command description
CLOSE_COM To terminate communication and disable a
specified COM port.
OPEN_COM To enable a specified COM port and initialize
communication.
SET_COM To set parameters of a specified COM port.
READ_COM$ To read data from a specified COM port.
WRITE_COM To send a string to the host through a specified
COM port.
GET_CTS To get CTS level.
SET_RTS To set RTS level.
CLEAR_COM To clear receiver buffer.
COM_DELIMITER To change delimiter of sending and receiving
string of a specified COM port.
FILE_TRANS Using FILE_TRANS to upload or download files.
FILE_TRANS_REALTIME Using FILE_TRANS_REALTIME to upload or
download files immediately.
FILE_TRANS_BAUD To get or set the FILE_TRANS baud rate.
FILE_TRANS_INTERFACE To get or set the FILE_TRANS interface.
A18. Memory commands
Command description
RAM_SIZE To check the total space in disk C.
ROM_SIZE To check the total space in disk D.
FREE_MEMORY To check the free space in disk C or disk D.
DISK_USEDSIZE To check the occupied space in disk C or disk D.