Argox PA-20 Basic Programming Manual User Manual
Page 58
PT-Basic Programming Manual Ver. 1.00
57/143
Purpose： To retrieve input from the keypad, scanning and store it in a
variable.
Syntax： A%=INPUT_S(S$ , variable)
Example： Result%=INPUT_S("",String$)
Description： A% is an integer variable to be assigned to the result.
A%
Meaning
0
Press the ENT
key and has not
input any item.
1
Inputs correctly.
255
Press the ESC
key.
-1
Input error.
S$ is a string variable, indicating the input default value.
variable is numeric or string variable that will receive the input
data. The data entered must match the data type of the variable.
When the input task is properly ended with the ENTER key being
pressed, the data string will be stored in a variable. Otherwise,
press the ESC key to abort the task.
Purpose： To set ENT auto press on/off when using “INPUT_S” command.
Syntax： INPUT_S_ CARRYENT(N%)
Example： INPUT_S_ CARRYENT(1)
Description： N% is an integer variable. When using “INPUT_S” command, it
can set auto press ENT on/off key after scanner reading.
N%
Auto press ENT
0
No
1
Yes
Purpose： To set vibrator on or off when using “INPUT_S” command.
Syntax： INPUT_S_VIBRATE(N%)
Example： INPUT_S_VIBRATE(1)
Description： N% is an integer variable. When using “INPUT_S” command, it
can set vibrator on or off after scanner reading.
N%
Meaning
0
Vibrate off
1
Vibrate on